Cleaning with DRYFT

When using DRYFT make sure the pad is flat to the floor, this will ensure smooth operation of the machine and an optimal clean.

Water usage

DRYFT is a low water use cleaning machine. Only a small amount of water or detergent is needed to wet and clean the floor. Simply allow the pad and powerful oscillating action to release the dirt.

After every use

You need to empty the clean water tank and recovery tank. This will reduce the risk of spillage, but also reduces the risk of bad odour due to bacteria build up.

Magnetic media

Keep magnetic media such as computer disks, credit cards and mobile phones away from the magnets. Do not use water hotter than 35°C (95°F), this can damage the valve.

	ATTENTION: Do not submerge DRYFT into water.
	SLIP HAZARD: DRYFT applies water and/or cleaning solution to the floor. Whilst DRYFT recovers the majority of the fluid there is still potential for a slip hazard due to residual fluid. Ensure appropriate PPE footwear is worn.
	SLIP HAZARD: DRYFT is intended for commercial use. Ensure others are alerted to the potential slip hazard by using appropriate signage.